Congratulations Raspberry

I enjoy digging through my discontinued piles of designer series paper and making them new and trendy again. Thoughts? 

Congratulations Raspberry

Stamps:

   Translucent Florals

Paper:

   Cameo Coral A-2

   Basic Black 4-1/8 x 5-3/8

   Raspberry Tart DSP 4 x 5-1/4, 4 x 3/4

   Pretty in Pink 4 x 1/2

   Basic White 2-1/2 x 3/8, 4 x 5-1/4 (Inside)

Ink:

   Tuxedo Black Memento

Technique:

   Punching

Accessories:

   Subtle Brads

   Rhinestone Basic Jewels

   Classic Label Punch

   Dimensionals

   Adhesive

First, I adhered the Raspberry Tart DSP panel onto a Basic Black matte and then onto the Cameo Coral card front.

I then adhered a Pretty in Pink strip onto a Raspberry Tart DSP strip and attached a (pink) Subtle Brad on each end of the strip.

Next, I adhered the strip across the center of the card front. 

I then stamped and punched the sentiment, using Tuxedo Black Memento ink and the Classic Label Punch.

Next, I attached the sentiment to the center of the strip, using dimensionals.

Lastly, I added a few Rhinestone Basic Jewels and adhered a Basic White panel to the inside of the card.

Here is another card, using a sentiment from the Perfectly Pears stamp set:

Congratulations Raspberry Too

For this last card, I added a sentiment from the Saying Something Ephemera Pack and colored in the sentiment with a couple of markers: Pretty in Pink and Basic Black. 

Congratulations Raspberry Tre

Thank you so much for giving me a bit of your time. Please Contact Me if I can return the favor. 

Check out all of the options by clicking on the headers above. 

Do not forget to FOLLOW and SUBSCRIBE to my blog. Please share, like, pin, tweet, or comment. I look forward to reading your thoughts and possible ideas for improvements.

HAPPY STAMPING!

Fresh Congratulations

I let the Designer Series Paper do all of the work for me again. What do you think? 

Stamps:

   Perfectly Pears

Paper:

   Fresh Freesia A-2

   Basic Black 4-1/8 x 5-3/8

   Floral Impressions DSP 4 x 5-1/4

   Basic White 4 x 5-1/4 (Inside)

   Leftover Paper Pumpkin Tag 2-1/8 x 5/8

Ink:

   Fresh Freesia

   Tuxedo Black Memento

Technique:

   Blending (Sponging)

   CAS

Accessories:

   Fresh Freesia Seam Binding Ribbon

   Strawberry Slush & Pretty in Pink Gems

   Blending Brush/Sponge

   Glue Dots

   Dimensionals

   Adhesive

First, I randomly tied knots in the Fresh Freesia Seam Binding Ribbon.

I then added a glue dot, under each knot to secure it onto the Floral Impressions DSP panel. I added a glue dot to each of the ends to secure the ribbon on the back of the panel as well.

Next, I adhered the Floral Impressions DSP panel onto a Basic Black matte and then onto the Fresh Freesia card front.

I then stamped the sentiment, using Tuxedo Black Memento ink, and added some Fresh Freesia ink to the tag, using a sponge.

Next, I attached the sentiment below the ribbon, using dimensionals.

Lastly, I added a few Strawberry Slush & Pretty in Pink Gems to the card front and adhered a Basic White panel to the inside of the card.

Thank you so much for spending time with me here. Contact Me if you have any questions.

Shop Now and take a look at all of our new products and current promotions. 

Subscribe to Paper Pumpkin and keep your monthly cost low! Join Me and become my newest team member. 

Either way, please share, like, pin, tweet, or comment. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

Trimming Pears

The Mossy Meadow & Gold Trim is so beautiful on both sides, I decided to feature both. Thoughts? 

Stamps:

   Perfectly Pears

Paper:

   Darling Duckling A-2, 1-3/8" Scallop Circle

   Secret Sea 5-3/8 x 4-1/8

   Painterly Pears DSP 1 x 5-1/4, 3 x 5-1/4

   Basic White 1-1/4" Circle, 5-1/4 x 4 (Inside)

Ink:

   Secret Sea

Technique:

   CAS

   Punching

Accessories:

   1-1/4" Circle Punch

   1-3/8" Scallop Circle Punch

   Mossy Meadow & Gold Trim 6" Strips (3)

   Low-Profile Sparkle Dots

   Tear & Tape

   Dimensionals

   Adhesive

First, I cut a 4 x 5-1/4" panel of Painterly Pears DSP. I then cut 1" from the left side and flipped it. Since, the DSP is two-sided, both sides coordinate and complement each other. Note, I did include the size of both panels above, in case you are using two different DSP packs.

I then adhered both panels onto a Secret Sea matte.

Next, I cut three strips of the Mossy Meadow & Gold trim. I laid them onto the DSP panel and flipped the two outer strips. I added tear & tape on the trim to make it easy to attach. You can use glue dots or liquid adhesive as well. I did make sure the strips of trim butted up against each other to make it look like one piece.

I then adhered the panel onto a Darling Duckling card front.

Next, I stamped and punched the sentiment and adhered it onto a Darling Duckling Scallop Circle. I attached it onto the card front, using dimensionals.

Lastly, I added a few Low-Profile Sparkle Dots and adhered a Basic White panel to the inside of the card.

Thank you for dropping by here. Contact Me if you need anything.

Shop Now and take a look at items that are Exclusively Online! You do not want to miss them.

Did you know that Paper Pumpkin and the Kits Collection make the perfect gift? Heck, I say, gift yourself one today! Check them out.

Join Me and become part of my team. Take a look at today’s offering and see if it is for you.

Please share, like, pin, tweet, or comment. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!